Dome Mount Photos

4x4CB.com
Additional Product Photos

Dome Mount Photos

The 3/8" Dome mount can be used in many different places where a "through-hole" mount is required. This could be in the roof, wing, bonnet or other panel... on a bracket or plate - the possibilities are almost limitless.

The cable connects with a right angled plug, if you are choosing the dome mount as part of a package, we include this cable with the correct plugs soldered on, but you can ask us to leave one of the plugs unfitted, if you will be poking the cable through tight gaps of holes in bulkheads etc. You will need a soldering iron to fit the plug yourself.

The dome mount is strong, neat looking, and usually keeps the cable on the inside of the vehicle, making it less prone to getting caught on branches etc.

In our package deals, this mount comes supplied with a 5m lead, if you want a longer one you can upgrade the cable to a 7m one by adding this item to the basket as well as the package : 7m Aerial Cable Instead Of 5m.

Diameter (i.e. it's "footprint") : 40mm
Hole size needed : 12.5mm
Maximum mounting surface thickness : 7mm
Clearance needed underneath, for cable & plug : 39mm minus the mounting surface thickness (i.e. if your roof is 2mm thick, you'll need a 37mm gap between the underside of the roof and your headlining if you want the dome mount to be hidden)

Note : To correctly set up an aerial on this mount, you will need an SWR meter. Info

SPECIAL OFFER : If you buy an SWR meter at the same time as a package, you get a FREE lead