 Basic Guttermount Kit - 3/8'
A good quality, basic guttermount kit for standard (3/8") aerials, complete with 4.5m of RG58 cable and plug Our Opinion :
A no-frills but strong and functional gutter mounting kit, with 3/8 stud suitable for the majority of our aerials. SIZE : - mm Wide
- mm High
- mm Deep
MAIN FEATURES : - Rubber weather cover protects connections at the bottom
- Can be adjusted for angle
- Supplied with allen keys for angle adjustment and retaining pins
- 4.5m of cable with plug, ready to go
DELIVERY
This guttermount is sent by First Class post IMPORTANT INFORMATION
Guttermounts make their earth connection via the two pins that tighten down into the bottom of the gutter - you will need to scrape away any paint and sealant etc to do this - just a couple of square millimeters for each pin.
On alluminium Land Rovers the metal will start to oxidise if not protected - you can prevent this by carefully sealing the points where the pins meet metal with a zinc based paint (most "red" rust inhibiting paints are) or spraying over the area with a plastic sealant spray from Halfords etc.
ANGLE ADAPTOR - Get your aerial upright even if you cant get this guttermount horizontal
Basic Guttermount Kit - 3/8'
£12.50 Page Views Counted Since 21st July 2006
This item is listed in
Vehicle Aerial Mounts > Gutter Mounts
|
