We are in the process of adding a full range of DIN kits to this site (May 2010), so this description is incomplete - please bear with us.

This DIN mounting kit has a strong metal surround that fits into the slot where the stereo would go, and has metal tags that you bend round to hold it in place - just like a standard stereo mounting cage does.

It's very easy to fit and holds the radio securely in place.

It's allows adjustment of the depth that the CB is fitted, so if you're limited for depth behind the opening (remember most CB's are much deeper than car stereos) you can have the CB "poking out" a little if necessary (or completely flush mounted - if you have the depth to allow this).

We will be adding the depth needed behind the slot opening soon, but if you are in any doubt if this will fit, email or phone us with the amount of depth you have got.

Don't forget that you will need an Extension Speaker if you use this mounting kit as the internal speaker will likely be hidden away!

We used to stock a Midland branded version of this , but the Midland one and the TTi one are exactly the same apart from the cardboard backing to the packaging - one said "Midland", these say "TTi"... the TTi ones cost us less so we are able to do them considerably cheaper than the Midland one retailed for (£22) - at £16 for this TTi DIN kit this should be the cheapest you'll find this DIN kit on sale anywhere!