||RM Model KL35
A small and popular amp producing around 25w output from 4w input. Will draw about 4amps.
IMPORTANT : You will need a 90cm connecting lead for the CB-to-amplifier connection - it is important that a 90cm one is used rather than any other length to ensure the SWR that the CB experiences while driving the amps' input is low.
Also important is that this is powered up all the time it is in line - it has an electronic relay which will close when power is removed and not let the signal from your cb through ... if you don't want to use it at a particular time, you must remove it from the circuit, rather than just cut the power to it.
Size : 109mm Wide x 89mm Deep x 35mm High
This item has now replaced the RM Model KL40
This item is listed in
CB Accessories > Amplifiers
© Copyright 2019, Communication Eleven