|
NO LONGER AVAILABLE Sorry, this product is no longer available This page exists for information & reference purposes only You may find an alternative product here : CB Microphones
A large, chunky replacement mic, suitable for use on Uniden wired 4-pin CB radios
Tough ABS housing High quality construction Metal mesh panels Built in strain relief at cable exit to minimise chances of cable breakage
Suitable for the following radios :
Modern CB's (Released within the last few years) that use the Uniden 4 pin microphone wiring :
COBRA 19 DX IV EU
INTEK M100 PLUS
INTEK M-110
INTEK 120
INTEK 130 PLUS
INTEK M-150 PLUS
MAXON CM10
THUNDERPOLE T-1000
TTI TCB-550
Older CB's :
AUDIOLINE 340
AUDIOLINE 341
AUDIOLINE 345
COBRA 19 GTL
COBRA UK25 LTD
COBRA UK29 LTD ST
COBRA 148
COBRA 148 GTL DX
COBRA 21 GTL
DANITA 240
DANITA 640
DANITA 1240
GALAXY NEPTUNE
GALAXY PLUTO
GRANDSTAND HOMEBASE
HARRY MOSS 325
KRACO KCB-4004
PAMA MX30E
PRESIDENT AR-144
PRESIDENT AX-144
PRESIDENT ANDREWS
PRESIDENT ADAMS
PRESIDENT DWIGHT D
PRESIDENT KP-77
PRESIDENT GRANT
PRESIDENT JFK
PRESIDENT SCOOPER
QUASAR MCB-400
SCOOPER MKY-550E
SCOOPER MKY-440B
STALKER ST-9-FDX (BUT NOT THE ORIGINAL AM ONLY STALKER ST-9)
SUPERSTAR 120FM
SUPERSTAR 3900
UNIDEN/UNIACE 100
UNIDEN/UNIACE 200
UNIDEN/UNIACE 300 BASE
UNIDEN/UNIACE 400
UNIDEN/UNIACE 404
UNIDEN PRO 420, 450 & 620
YAESU FT101
YAESU FT7
YAESU FT901
If you don't see your radio listed, please see the other main 4 pin wiring standard here : Cobra HG-M73 - Cybernet 4 pin wiring If it's not there either then you may have one the few other radios that don't conform to either mic wiring specification in which case you can still order this mic but you will need to tell us the make and model of your CB in the box provided in checkout for 'additional information'. Contact us if you have any questions.
This item is listed in
CB Accessories > Microphones > Non Amplified (Standard) Mics
|
